Pro-fax EP348T high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good cold temperature impact resistance.
Pro-fax EP348T
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 50 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) | 160000 psi |
| Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) | 1090 MPa |
| Tensile Strength at Yield (2 in/min) | 3100 psi |
| Tensile Strength at Yield (50 mm/min) | 21 MPa |
| Tensile Elongation at Yield | 5 % |
| Notched Izod Impact Strength (73 °F, Method A) | 2.3 ft-lb/in |
| Notched Izod Impact Strength (23 °C, Method A) | 123 J/m |
| Deflection Temperature Under Load (66 psi, Unannealed) | 219 °F |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 104 °C |
Technical Data Sheet
Technical Data Sheet - ASTMProcess
Injection Molding
Resin
Polypropylene, Impact Copolymer
Applications
TWIM Food Containers